在线免费观看成年人视频-在线免费观看国产-在线免费观看国产精品-在线免费观看黄网站-在线免费观看精品

產品分類

當前位置: 首頁 > 產品分類>

  • 系列名稱:Telaire 7000 手持式室內空氣品質監測器 CO2濃度檢測
    系列描述:

    elaire T7000系列手持室內空氣品質(IAQ)監測器采用紅外專利技術,可在計算實時通風率的同時精確測量二氧化碳和溫度。Telaire 7000系列還具有數據記錄和RH數據采集功能。 

    產品應用

    • 確定通風不良或不合標準的區域

    • 確定通風過度的空間中隱藏的節能措施。

    • 確定通風是否是空氣質量投訴的一個因素。

    • 檢測找到燃燒的煙霧源

    • 用作校準壁掛式CO 2和其它類型的CO2傳感器的測量輸出參考 

    產品特點

    • 獲得專利的雙光束Absorbing Infrared?氣體傳感器可確保長期穩定性和耐用性。

    • 大型,易于閱讀的顯示屏。溫度以°F或°C顯示。CO 2以ppm顯示。輕松調整高度變化。

    • 使用外部端口和顯示器進行快速,簡單的校準。用環境空氣或瓶裝氣體進行校準。

    • 使用機載控件或可選的計算機界面(UIP套件型號2072)校準,設置海拔高度,更改°F或°C

    • 翻轉支架進行桌面監控。通過RJ45連接器輸出的電壓為大多數數據記錄器提供了便捷的接口。

    • 配置交流電源適配器提供外部電源。

    • 使用4節AA堿性電池作為內部電源(產品銷售時不包括在內)可長達80小時。

    • 根據外部差分讀數內的CO 2顯示每人通風量(cfm)。

    產品基本參數

    Method

    Dual Beam Absorption Infrared?

    Sample Method

    Diffusion or flow through (50 to 100 ml/min)

    Display LCD

    Independent CO2 and temperature readings. Calculates and displays ventilation rates.

    Operating Conditions

    32°F to 122°F (0°C to 50°C)
    0 to 95% RH, non-condensing

    Storage Temperatures

    -4°F to 140°F (-20°C tp 60°C)

    Certification

    FCC Class 15 Part B

    Warranty

    18 months parts and labor

    Performance-CO2 Channel

    Measurement Range

    0 to 10,000 ppm display
    0 to 4000 ppm voltage output

    Display Resolution

    ±1 ppm

    Accuracy

    ±50 ppm or 5% of reading, whichever is greater

    Repeatability

    ±20 ppm

    Temperature Dependence

    ±0.1% of reading per °C or ±2 ppm per °C, whichever is greater, referenced at 25°C.

    Pressure Dependence

    0.13% of reading per mmHg (corrected via user input for elevation)

    Response Time

    <60 seconds for 90% of step change

    Warm-Up Time

    <60 seconds at 72°F (22°C)

    Calibration Interval

    12 months, offset adjustment using single gas at 0 to 1000 ppm CO2. Full factory calibration available.

    Performance-Temperature Channel

    Temperature Range

    Voltage output: 32°F to 104°F (0°C to 40°C)
    Display: 32°F to 122°F (0°C to 50°C)

    Display Resolution

    0.1°F (0.1°C)

    Display Options

    °F, °C, of off. Set with panel button.

    Accuracy

    ±2°F (±1°C)

    Response Time

    20 to 30 minutes (case must equilibrate with environment)

    Calibration Interval

    12 months, offset adjustment using temperature standard at 50°F to 86°F (10°C to 30°C). Full factory calibration available.