Ex i temperature transducer: converts signals from thermocouples installed in Ex areas and mV sources and transmits a 0/4…20 mA signal to a load in the safe area. Freely programmable. 3-way isolation, screw connection, SIL.
Input for thermocouples and mV sources, intrinsically safe [Ex ia] IIC
4...20 mA or 20...4 mA output signal range
High level of accuracy over the entire measuring range
Configuration via software (Analogue-CONF or DTM)
Safe electrical isolation between input, output, and supply
High transmission accuracy
Status and error indicator
Power supply possible via DIN rail connector
Housing width of 12.5 mm
Screw connection available
