可用作高柔性和精確實驗室儀器
堅固的塑料外殼還設計用于惡劣的工業用途
可通過 PC 或直接使用 5 按鈕進行快速并安全地投射
可使用插入選項進行改進
PAX D，用于標準/模擬信號
PAX T，用于熱電偶和 PT100
The Red Lion PAXCDL10 series plug-in card is an analogue output card used with EPAX display. The PAX meter can be fitted with up to three option cards such as serial communications, analogue output, and setpoint output. However, only one card from each function category can be installed at a time. The linear DC output plug-in card provides either 20mA or 10V signals. The plug-in setpoint cards provide dual FORM-C relays (5A), quad FORM-A relays (3A), quad sinking, or quad sourcing open collector logic outputs.
Terminal block and quick disconnect connector
Resolution is 1/3500
Response time is 10ms
RS232, RS485, Modbus, DeviceNet and Profibus-DP communication interfaces
Readout values and setpoint alarm values can be controlled through the bus
Use with PAX units
cULus approved
CSA Certified
CE certified
| 屬性 | 數值 |
|---|---|
| 附件類型 | 插入式卡 |
| 使用于 | EPAX 顯示屏 |
